? rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 1 of 3 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. RF1172D-032905 electrical characteristics characteristic sym notes minimum typical maximum units center frequency at 25c absolute frequency f c 1, 2, 3 433.92 mhz insertion loss (433.760 - 434.080) il min 1, 3 1.6 2.5 db 3 db bandwidth bw 3 1, 3 500 600 800 khz rejection attenuation: (relative to ilmin) 10 - 414 mhz 1, 3 50 55 db 414 - 424 mhz 45 50 424 - 431 mhz 30 34 431 - 432 mhz 18 22 432 - 433 mhz 12 17 434.92 - 442 mhz 16 19 442 - 550 mhz 40 45 550 - 1000 mhz 50 55 temperature freq. temp. coefficient ftc 0.032 ppm/c 2 frequency aging absolute value during the first year |fa| 5 10 ppm/yr impedance @ fc input z in = r in llc in z in 1 1428 w // 111.5pf output z out = r out llc out z out 961 w // 111.8pf lid symbolization (y=year ww=week s=shift) 477 // ywws standard reel quantity reel size 7 inch 9 500 pieces/reel reel size 13 inch 3000 pieces/reel ? ideal front-end filter for european wireless receivers ? low-loss, coupled-resonator quartz design ? simple external impedance matching ? complies with directive 2002/95/ec (rohs) 10 the RF1172D is a low-loss, compact, and economical surface-acoustic-wave (saw) filter designed to pro- vide front-end selectivity in 433.92mhz receivers. receiver designs using this filter include superhet with 10.7mhz or 500khz if, direct conversion and superregen. typical applications of these receivers are wire- less remote-control and security devices operating in europe under etsi i-ets 300 220. this coupled-resonator filter (crf) uses selective null placement to provide suppression, typically greater than 40db, of the lo and image spurious responses of superhet receivers with 10.7mhz if. rfm?s ad- vanced saw design and fabrication technology is utilized to achieve high performance and very low loss with simple external impedance matching. 433.92 mhz saw filter RF1172D sm3838-8 case 3.8 x 3.8 caution: electrostatic sensitive device. observe precautions for handling. notes: 1. unless noted otherwise, all measurements are made with the filter installed in the specified test fixture which is connected to a 50 w test system with vswr 1.2:1. the test fixture l and c are adjusted for minimum insertion loss at the filter center frequency, f c . note that insertion loss and bandwidth and passband shape are dependent on the impedance matching component values and quality. 2. the frequency f c is defined as the midpoint between the 3db frequencies. 3. where noted specifications apply over the entire specified operating temperature range of -40c to +105c. 4. the turnover temperature, t o , is the temperature of maximum (or turnover) frequency, f o . the nominal frequency at any case temperature, t c , may be calculated from: f=f o [1-ftc(t o -t c ) 2 ]. 5. frequency aging is the change in fc with time and is specified at +65c or less. aging may exceed the specification for prolonge d temperatures above +65c. typ- ically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years. 6. the design, manufacturing process, and specifications of this device are subject to change. 7. one or more of the following u.s. patents apply: 4,54,488, 4,616,197, and others pending. 8. all equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 9. tape and reel standard per ansi / eia 481. 10. this product complies with directive 2002/95/ec of the european parlament and of the council of 27 january 2003 on the restricti on of the use of certain hazadous substances in electrical and electronic equipment. pb
433.92 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 2 of 3 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. RF1172D-032905 absolute maximum ratings rating value units input power level 10 dbm dc voltage 12 vdc storage temperature -40 to +125 c operable temperature range -40 to +125 c soldering temperature (10 seconds / 5 cycles max.) 260 c pin connection 1 input 2 input ground 3 ground 4 case ground 5 output 6 output ground 7 ground 8 case ground matching circuit to 50 w w electrical connections a 1 2 3 b 7 6 5 4 c h 7 6 5 4 e f g 1 2 3 8 8 d 1 2 3 8 input output 7 6 5 4 pin connection 1 input ground 2 input 3 ground 4 case ground 5 output ground 6 output 7 ground 8 case ground optional electrical connections 7 6 5 4 1 2 3 8 input output c c matching circuit to 50 w w 2.7pf 2.7pf 18nh 39nh 6.8pf 18nh 39nh 6.8pf dimension mm inches min nom max min nom max a 3.6 3.8 4.0 0.14 0.15 0.16 b 3.6 3.8 4.0 0.14 0.15 0.16 c 1.00 1.20 1.40 0.04 0.05 0.055 d 0.95 1.10 1.25 0.037 0.043 0.05 e 0.90 1.0 1.10 0.035 0.04 0.043 f 0.50 0.6 0.70 0.020 0.024 0.028 g 2.39 2.54 2.69 0.090 0.100 0.110 h 1.40 1.75 2.05 0.055 0.069 0.080 case dimensions
433.92 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 3 of 3 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. RF1172D-032905
|
